The menu Advanced Wireless Settings will appear where you can change the channel.Ĭonsider filtering the packet capture to reduce clutter when analyzing packet traces. To do this, click the Capture menu, choose Options, and click Wireless Settings. For example, if the wireless network is set to channel 1 for the traffic you’re interested in, then configure To select an interface, click the Capture menu, choose Options, and select the appropriate interface.īe certain to monitor the correct RF channel. Included with AirPcap, which increases the listening ability of the tool.įor MAC users, you should be able to interface Wireshark directly with yourīefore capturing packets, configure Wireshark to interface with an 802.11 client device otherwise, you’ll get an alert “No capture interface selected!” when starting a packet capture. Tuned to Wireshark and operates very well.

Radio designed to work effectively with Wireshark. If you have trouble getting Wireshark working with existingĬlient cards, then consider purchasing AirPcap, which is a USB-based 802.11 Wireshark), but you’ll only see (at best) packets being sent to and from the computer running In this case, you can try turning promiscuous mode off (from inside The issue is that many of the 802.11 cards don’t support promiscuous mode. Simply go to, download the software for your applicable operating system, and perform the installation.Ī problem you’ll likely run into is that Wireshark may not display any packets after starting a capture using your existing 802.11 client card, especially if running in Windows.

Wireshark (formally Ethereal) is freely-available software that interfaces with an 802.11 client card and passively captures (“sniffs”) 802.11 packets being transmitted within a wireless LAN.

Wireshark filter broadcast traffic